RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3584|回復: 5
打印 上一主題 下一主題
收起左側

servo question building tamiya truck

[複製鏈接]
跳轉到指定樓層
1#
hsukoonyuen 發表於 2015-10-4 20:50:29 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Hi guys, I am new here and just start building my King Hauler + MFC01


I have a Futuba s3003 servo for shifting already, however I am not sure which servo is the best for steering, I am looking for a stronger servo for steering but its seems those high torque high voltage servo will fire the MFU or cause the truck to shut down... so does it mean I sould stay with those servo operating at 6V, around 10kg torque?


2#
 樓主| hsukoonyuen 發表於 2015-10-5 00:13:19 | 只看該作者
also what differential grease do you guys use in the truck?
3#
ckuen2004 發表於 2015-10-6 10:55:21 | 只看該作者
a 4.8v input servo like S9203 S9204  S9255  9-9.5KGS torque enough for a Tamiya truck
4#
 樓主| hsukoonyuen 發表於 2015-10-6 23:49:15 | 只看該作者
i am now using two s3003 for a start, will change the steering servo for a stronger one later.

one question is if a servo shows both torque figures at 4.8v and 6v, will it operate at 4.8v under the MFC01 unit? I worry it might draw more power based at 6V consumption
5#
GTR-34 發表於 2015-10-9 20:19:24 | 只看該作者
two s3003 is enough for both steering and shifting, of cause you can use it until you cant accept the performance or it went haywire.

it will depend on the supply voltage of the servo port on the MFC, i don't have one in hand therefore i cannot test the voltage, however, those figures shows torque when supplying 4.8v and 6v, and 6v power consumption will always higher than 4.8v when current(I) is same.
6#
 樓主| hsukoonyuen 發表於 2015-10-10 15:18:43 | 只看該作者
thanks for your advise, I think two s3003 works fine, its seems i dont need to install external ESC to prevent MFC unit shuts down on run
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-12-8 11:38 , Processed in 0.031352 second(s), 14 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表