電變問題

請問各位師兄 呢只電變點設中位？

Sanwa BL-sport

使用電圧	7.2Ｖ	連続最大電流	200Ａ（前進） 100Ａ（後進）
電圧降下		ロス抵抗	0.006Ω（前進） 0.012Ω（後進）

user manual
http://sanwa-denshi.co.jp/rc/car ... F%96%E8%AA%ACB5.pdf

師兄 呢個睇過 但日文睇唔明

■Please confirm that a motor connector is not connected.
●I turn on power switch. Please perform it in order of transmitter → speed controller by all means.
  (when I turn it off speed controller → transmitter)
●As BL-sport detects the neutral position of the transmitter at the time of power supply injection, please do not operate a transmitter until green LED turns on.
If green LED turns on, please confirm whether an LED checker lamp works like the right figure.
●If adjustment is over, you connect a motor connector, and please prepare for the run.
※When green and red LED turn on in the state that I operated all over the progress side, please set a reverse switch on the transmitter throttle side in reverse (REV).

■Operation method of brakes and the next generation (back)
●I am running, and brakes work for the next generation side in proportion to operation in throttle trigger progress when I operate it.
  When a given period of time passes with operating it on the brakes side, he/she reverses.
※When there is an endpoint adjust function to the transmitter, I can coordinate the work of brakes in EPA-L. The next generation is not made have weak brakes when I make a set point small.
■Heat protector function
●When the FET of the speed controller generates heat by overload abnormally, I stop the output of the motor.
※When a heat protector function acts, green and the red of the LED checker lamp continue flashing on and off.
■Over current protection function
●When an over current flows by the output short such as motor locks, I turn off FET automatically and protect FET.
※When an over current protection function acts, the LED checker lamp does not turn on

ozone 發表於 2016-7-19 07:31
Sanwa BL-sport

user manual

搞掂，唔該師兄。

小龍 發表於 2016-7-20 23:16
■Operation method of brakes and the next generation (back)
●I am running, and brakes work for th ...

搞掂，唔該小龍兄。