請問有冇adaptor可將 新servo 插落 舊接收 ???

I have an old model 搖控 (about 15 yrs ago.....), 但發現新買的servo and ESC 個插唔啱插個舊接收......

請問有冇adaptor可將 新servo 插落 舊接收 ??? 有可解救???

原帖由 笨仔 於 2007-4-26 11:34 發表

你買過兩條啱新servo and ESC 用嘅插同熱縮套,張舊線跟新線用熱縮套接駁,唔洗焊錫嘅,記住分清楚紅色線同黑色線,接收座排列位置,記住喇!  

First of all , thank you !!!

但有d唔明...... you said : "張舊線跟新線用熱縮套接駁"...

你意思係咪我要買2條線,  one for new servo, one for old receiver, then combine both together?? (用servo 做example)

and where can I buy the cable??

原帖由 bigben 於 2007-4-26 11:43 發表


First of all , thank you !!!

但有d唔明...... you said : "張舊線跟新線用熱縮套接駁"...

你意思係咪我要買2條線,  one for new servo, one for old receiver, then combine both toge ...

..........更正........
線插可以係模型鋪買到.
點樣接駁?
先剪斷舊線一半,唔要插頭,分開三條線,套入熱縮套,開6mm左右線口,將新線同樣開相約線口,新線太長可以剪短啲嘅,然後將銅線部份互相連接樓埋,將熱縮套套上,用火機微微燙過,咁就DIY完成喇!(記住分清楚顏色正負)

[茶實真係買過個新嘅接收好過]

[ 本帖最後由 笨仔 於 2007-4-27 19:24 編輯 ]

thank you so much!!!

唉!!!真係笨仔,
咁樣教人

原帖由 G4guy 於 2007-4-26 15:16 發表
唉!!!真係笨仔,
咁樣教人

係囉!! 教壞人!!
第一：唔用辣雞焊埋想死呀？
第二：舊插同新插線既排位係有唔同架!!(就好似以前KO同"腐他靶"個插咁 )

點解唔直接換插呢？唔使換線都得架!
再唔係買過個算啦

[ 本帖最後由 wong2109 於 2007-4-26 15:45 編輯 ]

I go to Cheong Sing and bought a receiver of which I can insert my crystal from my old receiver into it..... (recommend by the sales)

HK$120!!!

then, no need to waste money to buy a new controller.....