TEAM POWERS電變設定講解

https://www.youtube.com/watch?v=-nSdgbl8a4s

呢排如果想買無刷電變，咁多牌子中，相信應該係TEAM POWERS係最抵加最好用。
咁如果買咗O既，又想SETUP得好O的O既，應該點搞呢?我地又搵到方景幫手講解一下TEAM POWERS電變設定問題。

TP電變都幾抵用, 我都有用開

唔識做 發表於 2018-6-8 13:49
TP電變都幾抵用, 我都有用開

以價錢同埋質量嚟講，算係好抵。
應該都冇乜對手添。

請問在那裡有售這牌子的電變?

KWS 有售 ：-）

多謝分享

收了隻二手反來，可否說下點校中位？

AMAT  上鏡果個係你？

joeechiu 發表於 2018-6-9 17:51
收了隻二手反來，可否說下點校中位？

http://www.team-powers.com/manual/XPS_V2_Manual-02012016_eng.pdf


◎Switch off the power of the speed control and please make sure the speed control is not connected to the battery.
◎Remove the motor gear to allow the wheels of the model are free to rotate.
◎Switch the transmitter on and move the transmitter throttle stick to the neutral position.
◎Connect the battery to speed control and press and hold the on/off button to turn on the unit until there is a BLUE Led light up.   
◎After the BLUE Led is light up, that mean throttle range setting mode is entered and the neutral position has been set.
◎Move the throttle to the full throttle position, then the BLUE Led will be flashing until a solid BLUE Led will be light up. Light up BLUE Led represent the full throttle position has been set.
◎Move the throttle stick to the full brake position, then the RED Led will be flashing until a solid RED Led will be light up. Light up RED Led represent the full brake position has been set.
◎Move the throttle stick back the neutral position again, then the flashing RED & BLUE(purple color) Led will be light up that means throttle range setting has been completed.
◎The speed control will be ready for use when it powers is off and on again.