Crawler and Servo Saver ~

請運各位大佬~~ 你地 d 爬爬車用乜 servo saver ?

我用埋大蛇 saver 都好似吾夠力.......吾用 saver , servo 味好易瓜 !?

大蛇 saver 都好似吾夠力....... 點算.......

lock servo saver. As your tire not as big as those Clod and TXT guy. Hitec 5995 won't have any problem.
Further I use MG995 for rear steering without servo saver. Never die. Even die, only HKD70. Change another one la.

原帖由 xz30624700x 於 2007-5-22 23:48 發表
ko..2123..

He said saver wo.
team memeber!!!

原帖由 orange00 於 2007-5-22 23:49 發表
lock servo saver. As your tire not as big as those Clod and TXT guy. Hitec 5995 won't have any problem.
Further I use MG995 for rear steering without servo saver. Never die. Even die, only HKD70.  ...

internet say [ MG995 ]  - Stall torque:15.0kg/cm (6.0V)

it only cost HKD 70 !!? where to buy !!??

原帖由 教主 於 2007-5-23 00:18 發表


internet say   - Stall torque:15.0kg/cm (6.0V)

it only cost HKD 70 !!? where to buy !!??

That guy's name .... EGNARO

EGNARO !?

Hitec 5955 + alloy servo horn is still No. 1 in RC Rock Crawler people.   

原帖由 rockdragon 於 2007-5-23 01:27 發表
Hitec 5955 + alloy servo horn is still No. 1 in RC Rock Crawler people.   

But only Hitec 5995TG come with real alloy servo horn. And there's only one guy use it on his crawler and show at internet in Hong Kong.

原帖由 rockdragon 於 2007-5-23 01:27 發表
Hitec 5955 + alloy servo horn is still No. 1 in RC Rock Crawler people.   

so how much a 5955 cost and its torque ?

原帖由 orange00 於 2007-5-23 02:26 發表

But only Hitec 5995TG come with real alloy servo horn. And there's only one guy use it on his crawler and show at internet in Hong Kong.

where to see it - the link please ~~ ~

原帖由 教主 於 2007-5-23 05:08 發表


so how much a 5955 cost and its torque ?

$6xx, 24Kg @ 6V

原帖由 orange00 於 2007-5-23 02:26 發表

But only Hitec 5995TG come with real alloy servo horn. And there's only one guy use it on his crawler and show at internet in Hong Kong.

Maybe I'm the only one in Hong Kong using this combination la! ...      .......... Here it is Brother orange ...  5955 + blue alloy servo horn    ..............        http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXCRT5

let me try try sin ~~~  

原帖由 rockdragon 於 2007-5-23 11:03 發表




Maybe I'm the only one in Hong Kong using this combination la! ...      .......... Here it is Brother orange ...  5955 + blue alloy servo horn    ..............        http://www2.towerho ...

That's why u broke the 2mm thick aluminium alloy servo plate.

原帖由 orange00 於 2007-5-23 17:54 發表

That's why u broke the 2mm thick aluminium alloy servo plate.

Well ! I was stupid mounting the servo plate in that way ...     but after I rearranged the mounting spot, everything works fine now...