TA05 入冷宮!!!

After today's race.... TA05 正式入冷宮

Doesn't matter how I set it.  Asked all around, and can get the car running correctly.  It's like drifting on the track.....

I tried with different ride height, springs, damper adjustment, camber.  Tires were Tamiya Reinforced B3.  And the car just drifting around the track.    Motor was Trinity Co27.  In a 5min race, I ran 3 more laps with my white pig M03 than my 27T TA05

Can it be the lower deck issue?  Lower desk looks a little 彎曲....  Should I get a Carbon lower deck???  

set 返好 down stop  未呀?
4 隻腳比你限死唔陏得, 架車又點走得好呢?

原帖由 GigaRacer 於 2007-6-11 01:58 PM 發表

                               
登錄/註冊後可看大圖

After today's race.... TA05 正式入冷宮

Doesn't matter how I set it.  Asked all around, and can get the car running correctly.  It's like drifting on the track.....

I tried with different r ...

Kid............pay more attention
it is your problem rather than the car itself

Corrected la, but still didn't solve the problem.  I don't know if the long term incorrect down stop made the lower deck 彎曲

It has to be the setting....  btw, I am an old man

downstop is very important.....how many downstop value u adopted for your TA05....

BTW, please check if your transmission is smooth.....I have come across this experience in my touring car....a small stone was knocked in the pitch of the rear gear pulley....the car always oversteer once off throttle.....trying  many setup, but cant solve the problem...finally, I know the problem is the unwanted small stone in the pulley....upon removal of this stone, everything appears in order...

So check your rear transmission very carefully....check if any unwanted object

I just clean up both gear boxes before the race.  Just that I didn't clean the ball diff, and it's not absolutely smooth, but it's not really bad.  Shouldn't be an issue.

What kind of tires are you using? Tires play a very important role.

1) what downstop value u ar using?

2) what spring and oil u ar using ?

3) please check if the belts are in good condition?

4) please check those pulleys to ensure no unwanted objects (just cleaning the gear box is not enough because those minor object could be hidden in the pitch of the pulley

5) check if the car can run smoothly,...maybe ball bearing die already

6) please check rear toe in...if the a-arm or a-arm stand already distorted

BTW, which lexan body u ar using....it also affect the performance wooh

原帖由 GigaRacer 於 2007-6-11 02:18 PM 發表

                               
登錄/註冊後可看大圖

It has to be the setting....  btw, I am an old man

I hv a perfect setting TA05......

you can ask 007

TA05絕對係超易SET又易走O既車嚟......

1) I don't know..... I thought downstop is for lowering the car, so I didn't have rebounds.  And possible damaged the lower deck.

2) I have the TRF oil damper with 40 oil and yellow spring front and rear

3) Rear belt is brand new, front belt is good condition

4) I just opened and cleaned both gear boxes

5) All bearing cleaned before the race

6) all still good.  nothing broke.  

Here is what I am going to do..... get a new lower deck, different color springs, and then I will re-build the car including the dampers It will take a while to order the parts, and take a long time before I can start doing anything..... so TA05 will be in 冷宮

不如你搵人地比賽d setting 試下sin la~
成個抄落黎試下...
再就下自己習慣再set..
日本仔都有d 27turn ge 比賽ga...
我個時架tb02 都係咁~
抄左人地個setting 之後完全吾同晒...

http://hk.search.yahoo.com/searc ... ;show_related=&
http://www.geocities.jp/freefiveten/index3.htm

[ 本帖最後由 ogre 於 2007-6-12 00:39 編輯 ]

原帖由 ogre 於 2007-6-12 00:32 發表

                               
登錄/註冊後可看大圖

不如你搵人地比賽d setting 試下sin la~
成個抄落黎試下...
再就下自己習慣再set..
日本仔都有d 27turn ge 比賽ga...
我個時架tb02 都係咁~
抄左人地個setting 之後完全吾同晒...

http://hk.search ...

邊到有得抄tb02
我又要

原帖由 Nobuta 於 2007-6-12 01:24 AM 發表

                               
登錄/註冊後可看大圖

邊到有得抄tb02
我又要

我睇搖控車書抄返黎ga

Tires were Tamiya Reinforced B3..

try the A tires as well? What kind of surface u are running? I think it's the tires

down stop is for controlling the down travel of the suspension arms. For ride height, adjust the spring collar on the shock.

try rear toe in as well.

M..  try to use TAMIYA tire type-A , even SOREX.
Tire is everything !!!
My TA05 only change「carbon-fiber shock stay」,「TA04 Hard Rear Upright（toe-in 0-degree）」,serpent shock ,the others are all original . I even use Futaba S3003 servo . But all grip of my TA05 comes from SOREX 28-degree , even other players use SOREX 36-degree（on XRAY T2 or etc.） . TA05 is a heavy car , require a bit more suspension stroke . You may 「Tamiya Reinforced B3」入冷宮, but try other TIRES .

Speaking of that..... I was using 60D Reinforced Type-A for my cooper, and that's lotttts of grip.  So.... is it really just the tires???  Hmmm.....  That day wasn't very hot, so maybe Type-A better than Type B3.

1) I don't know..... I thought downstop is for lowering the car, so I didn't have rebounds.  And possible damaged the lower deck.

No down stop --> very little or no grip (tires lifted off the ground) on inner side of tires when turning