我的DF-03 Avante MKII (Completed)

Finally join the DF03 family.  Have  bought some options that members here normally suggest.  My question is what thing should pay attention when making the car and I plan to use Tamiya 101BK ESC with black pig motor.  Any suggestion?

Thanks.

[ 本帖最後由 explorer888 於 2007-8-13 01:44 編輯 ]

就算用黑豬 , 個 101BK ESC 都會 太熱而停 ! ( 因為我以經試過 )

先看這個，http://bbs.rc-evo.com/viewthread.php?tid=46696&extra=page%3D1
特別是 #11 前懸掛的 Pin 要加介指，Damper 柱加 O-ring(前3後4)。跟據各 brothers 的試車報告，想部車夠力同 jump 得好，最好用 Tamiya 的 BZ Motor，電變最好用細 size 的，因為空間太小，你原先想用的 101 不能 support BZ。
快 D 完成部車，参加 TKO Off-Road Patry

原帖由 li5115 於 2007-8-8 12:05 發表

                               
登錄/註冊後可看大圖

先看這個，http://bbs.rc-evo.com/viewthread.php?tid=46696&extra=page%3D1
特別是 #11 前懸掛的 Pin 要加介指，Damper 柱加 O-ring(前3後4)。跟據各 brothers 的試車報告，想部車夠力同 jump 得好，最好用 T ...

X2.  same suggestion!!

快 D 完成部車，参加 TKO Off-Road Patry


Quick!!!!!  

雖然同一合車，但是圖中的補品我一件都冇...

原帖由 yiu 於 2007-8-8 12:27 發表

                               
登錄/註冊後可看大圖

雖然同一合車，但是圖中的補品我一件都冇...

無補品唔緊要，最緊要係玩得開心。嚟啦，包你話好玩！

I'm new, I want to join your family too, anyones C Hing can adv full set of car how much?
thanks

不過話時話, 3-RACING出果D鏍絲就真係好差, 吾係話佢D料差, 而係插六角匙果個位好多時都細左, 攪倒支六角批插吾倒入去扭

原帖由 lordtony 於 2007-8-8 12:58 發表

                               
登錄/註冊後可看大圖

I'm new, I want to join your family too, anyones C Hing can adv full set of car how much?
thanks

What do expect? A basic car or the car in full options?
If the basic assembly kit, just HK$700 something.

thanks Li5115,
I want to full options of the car and what good
suggestion of Tx & RX?

原帖由 courel500 於 2007-8-8 11:50 發表

                               
登錄/註冊後可看大圖

就算用黑豬 , 個 101BK ESC 都會 太熱而停 ! ( 因為我以經試過 )

Thanks for the advice, I have already bought Futaba 330 ESC.

原帖由 li5115 於 2007-8-8 12:05 發表

                               
登錄/註冊後可看大圖

先看這個，http://bbs.rc-evo.com/viewthread.php?tid=46696&extra=page%3D1
特別是 #11 前懸掛的 Pin 要加介指，Damper 柱加 O-ring(前3後4)。跟據各 brothers 的試車報告，想部車夠力同 jump 得好，最好用 T ...

Pin 要加介指----> I can only got the Tamiya one, 3 racing one is out of stock...

Damper 柱加 O-ring(前3後4)-----Don't understand

I will surely join TKO offroad meeting later!

原帖由 gibson 於 2007-8-8 12:14 發表

                               
登錄/註冊後可看大圖

X2.  same suggestion!!

快 D 完成部車，参加 TKO Off-Road Patry


Quick!!!!!  

SURE!

原帖由 AlexFiona 於 2007-8-8 15:20 發表

                               
登錄/註冊後可看大圖

不過話時話, 3-RACING出果D鏍絲就真係好差, 吾係話佢D料差, 而係插六角匙果個位好多時都細左, 攪倒支六角批插吾倒入去扭

I have bought the 3 racing Ti screw package at $180.  Buy speedmind might be cheaper.

原帖由 explorer888 於 2007-8-8 20:08 發表

                               
登錄/註冊後可看大圖

Pin 要加介指----> I can only got the Tamiya one, 3 racing one is out of stock...

Damper 柱加 O-ring(前3後4)-----Don't understand

I will surely join TKO offroad meeting later!

The option oil damper is too long, so put three o-ring inside the damper sheft to shorten the lenght.



Check no.53 below:

http://bbs.rc-evo.com/viewthread ... page%3D1&page=4

[ 本帖最後由 gibson 於 2007-8-8 22:14 編輯 ]

原帖由 AlexFiona 於 2007-8-8 15:20 發表

                               
登錄/註冊後可看大圖

不過話時話, 3-RACING出果D鏍絲就真係好差, 吾係話佢D料差, 而係插六角匙果個位好多時都細左, 攪倒支六角批插吾倒入去扭

Yes, you are right------------>插六角匙果個位好多時都細左

So, I use those ball head hex wrench can fix this problem.

Recent progress, hope I can fast enough to meet you guys on Sunday.

原帖由 gibson 於 2007-8-8 22:11 發表

                               
登錄/註冊後可看大圖

The option oil damper is too long, so put three o-ring inside the damper sheft to shorten the lenght.



Check no.53 below:

http://bbs.rc-evo.com/viewthread.php?tid=46696&extra=page%3D ...

Thanks for your information.  By the way, will you use harder oil in front damper?

原帖由 explorer888 於 2007-8-9 17:00 發表

                               
登錄/註冊後可看大圖

Thanks for your information.  By the way, will you use harder oil in front damper?

Use the Yellow or the Green one.

Almost complete!  Make one modification, hope to make it more like to original Avante.