Much More Chargers

Bros, what arethe major functional differences between much more "Cell Master" and "Slicent Charger" ?

Silent and noisy.

原帖由 ryancmlam 於 2007-8-8 20:53 發表

                               
登錄/註冊後可看大圖

Bros, what arethe major functional differences between much more "Cell Master" and "Slicent Charger" ?

cell master need external power supply while silent charger doesn't
cell master also charges Li-po (but dunno need add on module or not)
beside max. charging and discharging current for cell master is 10A respectively while 6A only for Silent charger

原帖由 niqueen 於 2007-8-9 13:22 發表

                               
登錄/註冊後可看大圖

cell master need external power supply while silent charger doesn't
cell master also charges Li-po (but dunno need add on module or not)
beside max. charging and discharging current for cel ...

Both need external power supply
both can charge li-po w/o any add-on module

silent support 5A Lipo charging
master only support 1A Lipo charging..

Find all acturate answers here ..

http://www.much-more.co.kr/sub.a ... ep=0&curLevel=0

Oh .. one more spec it didnt mentioned.. silent charger wont support same brand's battery heatsink MR-BHB2

[ 本帖最後由 kawada 於 2007-8-9 17:10 編輯 ]

Slient can charge and discharge Lipo, Ni-mh & Ni-cd by default setting
Cell master can set your own setting

原帖由 RX78amuroray 於 2007-8-10 02:51 發表

                               
登錄/註冊後可看大圖

Slient can charge and discharge Lipo, Ni-mh & Ni-cd by default setting
Cell master can set your own setting

Oh. Thanks a lot. Thats exactly what I want to know. I can't get (may be I'm not clever enough) this information from muchmore's website.