Thanks again. Would like to buy the steering post and the servo saver kit, as I found the original parts are a bit "soft".....
In addition, looking for just the "trianglar" base which attach to the gear box and the chasis. However, Hot Racing kit only offers the whole thing with the swing arm. Any thought?
I've bought the GMx steering support (just the bracket). It's got two bearings inside and works pity well. Worth a try! Regarding the servo saver, any idea how to prevent it from wobbling? I found that, expecially when the bike is going fast, the front wheel can shake quite a bit some time. I'm not sure is it the servo saver problem or else!!
Terribly sorry beebee. I can't type Chinese character on my notebook. I do apologise for that!!
The one I've bought is the "Groose-neck" (similar to the one you've post me above - copywrite_hot_racing55579). It's made by GMP. It's works ok. Maybe it's my driving technique which causes the problem...haha.
Thanks for all the expertise. May I ask you some more questions:
1) Would it be crucial if I don't install the "tyre-tube" inside?
2) I found the torque at slow speed is not quite enough (using Tank 20-30 6650kv motor, 11T gear, 7.4V Lipo). I enjoy high speed, but there is a penalty at pickup after a turn. Any suggestion?
Thanks again....
收藏
勁正
嬲嬲
~~價錢相比gp"x "產品貴好多
.......唔多建議用啦.....如果你仍然想睇吓.......廣華街得一間有售Hot 仔野.....間鋪叫"傷殘"(反語).......
樓主
......所以我地已經全部用番原裝部品.........
....就要諗清楚啦...........哈
..至於話頭轆震....其實有好多原因解釋....以我理解比如出彎做動作.....1) 頭眼鏡位過鬆(上住頭避震果件膠位)...或用o左啤呤(4x8)係會有頭震現象......2) 頭呔有呔膽...但係整得唔夠圓同直....都會有頭震現象.........3) 頭呔裝啤呤位果2粒膠杯同個呤有虛位...一樣有頭震現象..........4) 地面有碎石之類...出彎比油都會令頭轆震動.....etc.................
