CarbOh...oh...8mm lipo enzo step by step

This is what I did a year ago.

[ 本帖最後由 billy86che 於 2007-11-2 12:06 編輯 ]

another angle. Note the "back bone" carbon plate on the side. I also installed another along the centre line.

[ 本帖最後由 billy86che 於 2007-11-2 11:47 編輯 ]

measuring stage

reinforcement

longer hollow shaft modified from Tamiya

adjustment for different gears

at least 50-turn motor (already fast enough)

Only HK$10 each cell. I used 2 of course.

I have to modify & reinstall them.

I made this from the ABC 4WD & a kyosho motor spacer.

塊炭板係邊到買架？

原帖由 WallaceNg 於 2007-11-2 11:58 發表

                               
登錄/註冊後可看大圖

塊炭板係邊到買架？

GxM.But you have to order. <$200 for A4 size * +-0.9mm.

但兩粒lipo電咪7.4Ｖ,AD board surport 到?

老師.. 問問你如果用 123A果D 3.7V 鋰叉電唔知得唔得呢?
我都想試下用7.4V...
將2粒123A 3.7V 800ma 電 放上MR02 個電池架上都OK woo...

有乜要注意?  唔知有冇AAA size的Li電呢?

原帖由 teamlosi 於 2007-11-2 12:18 發表

                               
登錄/註冊後可看大圖

但兩粒lipo電咪7.4Ｖ,AD board surport 到?

Yes. The AD board can handle 10v. Of course you have to change the fets to play safe.

原帖由 sumandy 於 2007-11-2 12:19 發表

                               
登錄/註冊後可看大圖

老師.. 問問你如果用 123A果D 3.7V 鋰叉電唔知得唔得呢?
我都想試下用7.4V...
將2粒123A 3.7V 800ma 電 放上MR02 個電池架上都OK woo...

No problem. But:
1. the dimension of the 123A is not desirable if you wish to obtain a low CG.
2. the li-ion is not as advanced as the li-po. Check the specs and the history of development of the 2.

[ 本帖最後由 billy86che 於 2007-11-2 12:58 編輯 ]

但我試了7.4Ｖ用在02車轉向好跳,是用AM board.

原帖由 billy86che 於 2007-11-2 12:23 發表

                               
登錄/註冊後可看大圖

No problem. But:
1. the dimension of the 123A is not desireble if you wish to obtain a low CG.
2. the li-ion is not as advanced as the li-po. Check the specs and the history of development of th ...

Hha.. 我唔多識電了野!不過Li-po如果有D Fit到個原裝兜依的話. 成舊放上去方便D law

用7.4V因為想快.. 聽講用雞摩都快到識!.

原帖由 sumandy 於 2007-11-2 12:19 發表

                               
登錄/註冊後可看大圖

唔知有冇AAA size的Li電呢?

Yes, but I could only find something from "LG" which was claimed to have 500mah but people on the net reported it has only 310mah max. So, it is rubbish.

I guess brand name companies are not likely to produce aaa lipo because they do not want to confuse the consumers and then receive complaints. So, let the small factories in China do that.

原帖由 teamlosi 於 2007-11-2 12:26 發表

                               
登錄/註冊後可看大圖

但我試了7.4Ｖ用在02車轉向好跳,是用AM board.

I guess you hold the answer already - AM board.