BRUSHLESS與BRUSHED的決擇.....

唉.....實在.......

但我仲有好多隻全新23T未用.........真係......難於決擇........

但又期待KO隻BRUSHLESS.....唉唉!

Actually I have the same problem, I have 10.5r and mamba max.  All are display only.   I am going to make my TA05MS with 10.5r.  This is my plan only..  don't know when I have time to build it!!   

I think is good to build a spare car with brushless system and play with 23T brushed!!  

[ 本帖最後由 gibson 於 2007-11-11 14:14 編輯 ]

我不單止仲有好多隻新23T......仲有好多隻VFS1......都唔知點算囉.......哈!

Same same, I think this is the most common problem, like 2.4G.

If I change to all the way 2.4G, how could I handle the old receivers and module!!  

原帖由 gibson 於 2007-11-11 14:29 發表

                               
登錄/註冊後可看大圖

Same same, I think this is the most common problem, like 2.4G.

If I change to all the way 2.4G, how could I handle the old receivers and module!!  

都成四隻定五隻接收......

我用TAIWAN的錢來算！
一個23T馬達約1000元+MC330約1700=2700台幣
一組左岸飛高無刷(5.5T)+電變約4900
BUT...................
碳刷馬達得再買銅頭機(車轉子銅頭)，換碳刷，這些工作做好還得調整馬達。

我會用無刷主要原因是~~~~~~~~~懶。一組裝上去都不用煩惱這麼多啦！

原帖由 龍崗小吳 於 2007-11-11 19:04 發表

                               
登錄/註冊後可看大圖

我用TAIWAN的錢來算！
一個23T馬達約1000元+MC330約1700=2700台幣
一組左岸飛高無刷(5.5T)+電變約4900
BUT...................
碳刷馬達得再買銅頭機(車轉子銅頭)，換碳刷，這些工作做好還得調整馬達。

我會用 ...

don't wast many time to maintain

[ 本帖最後由 micky 於 2007-11-11 21:00 編輯 ]

我相信以Brushless的優點, 取代Brushed只是時間問題.  

如果唔係有未來價值....都唔會咁大投資......

不過之前O的投資就真係....哈!

暫時都唔怕既~~用個brushless esc去推隻 23t...咪當放左鉛係電子野果邊咯....
至於d vfs1.... ..... ..... .....我諗你都唔會用得多

原帖由 doooouglas 於 2007-11-12 17:31 發表

                               
登錄/註冊後可看大圖

暫時都唔怕既~~用個brushless esc去推隻 23t...咪當放左鉛係電子野果邊咯....
至於d vfs1.... ..... ..... .....我諗你都唔會用得多

有用O架我......我架TA05同TRF415都係用VFS1架.......
宜家架TA05MS都係架......

係指....23t都仲有剩餘價值.....
但有刷電變就....前路芒芒