Step by Step: lower ride height using DIY rear toe-in link

Step by step to get a lower ride height and better clearance for the AWD:

These pictures show Part 2:

I'll give this to 偉哥 and will make the last one for Dick dick Jai because I promised them. No one else will be entertained then. The rest of you have to DO IT YOURSELF!!!!!

[ 本帖最後由 billy86che 於 2007-11-17 15:34 編輯 ]

好有心機

my AWD isn't with me right now
but i don't quite understand what's the purpse of "remove some plastic as shown" in the3rd photo

原帖由 800mah 於 2007-11-17 19:51 發表

                               
登錄/註冊後可看大圖

my AWD isn't with me right now
but i don't quite understand what's the purpse of "remove some plastic as shown" in the3rd photo

Compare the original (left) with the modified one (right).
Only by doing this can I later remove the toe in link.

[ 本帖最後由 billy86che 於 2007-11-17 22:01 編輯 ]

今日見到偉哥, 牙擦擦咁啦
不過真係好有用, 起碼low低多1-2mm
又乾淨好多

原帖由 henry888 於 2007-11-18 01:37 發表

                               
登錄/註冊後可看大圖

今日見到偉哥, 牙擦擦咁啦
不過真係好有用, 起碼low低多1-2mm
又乾淨好多

Don't tell him that there is still something to be done before he can maximize the use of the DIY.

那么怎么更换后胎尺呢?

原帖由 haihe 於 2007-11-18 11:17 發表

                               
登錄/註冊後可看大圖

那么怎么更换后胎尺呢?

You have to think more carefully and read more carefully the captions of the pictures.

我想問本身舊野有咩用既呢??

原帖由 椰禮 於 2007-11-18 19:59 發表

                               
登錄/註冊後可看大圖

我想問本身舊野有咩用既呢??

lower ride height and better clearance.

我指未改之前姐係係車架上有咩作動??

原帖由 椰禮 於 2007-11-18 20:26 發表

                               
登錄/註冊後可看大圖

我指未改之前姐係係車架上有咩作動??

Sorry, I couldn't follow. Did you mean what was wrong with the original parts?
原本凸出黎,唔夠平,易high地.

[ 本帖最後由 billy86che 於 2007-11-18 22:28 編輯 ]

唔該老師,好正,等我又試下整條C比架(90)用

係尾轆呔尺,控制尾轆toe in ,
toe in 少D 就轉多D
toe in 多D尾定D

nice job

this is reinforcement part 1.
o個到加兩個黑色小片目的係咩呀?其實係咪應該可以唔洗加?

原帖由 Colin 於 2007-11-19 12:35 發表

                               
登錄/註冊後可看大圖

this is reinforcement part 1.
o個到加兩個黑色小片目的係咩呀?其實係咪應該可以唔洗加?

You can try it by yourself.

原帖由 Colin 於 2007-11-19 12:35 發表

                               
登錄/註冊後可看大圖

this is reinforcement part 1.
o個到加兩個黑色小片目的係咩呀?其實係咪應該可以唔洗加?

You can try it by yourself. (Let me remind you that I won't be using any screw at the bottom and the toe-in link is very thin after filing)