Step by Step: lower ride height using DIY rear toe-in link

原帖由 billy86che 於 2007-11-19 16:21 發表

                               
登錄/註冊後可看大圖

You can try it by yourself. (Let me remind you that I won't be using any screw at the bottom and the toe-in link is very thin after filing)

toe-in link is very thin after filing... easy break?

原帖由 sumandy 於 2007-11-19 16:46 發表

                               
登錄/註冊後可看大圖

toe-in link is very thin after filing... easy break?

If you have added the reinforcement as shown , you can even go further to remove the middle part of the toe-in link to achieve an even better clearance and remove the upper part (the handle) of the bumper to make it lighter.

喎！真正勁！！老師你係勁！！！