香港邊度有得幫人+FET

我想加,同埋通常焊幾耐架??THANKS

原帖由 isaacleeaa 於 2008-1-20 22:00 發表

                               
登錄/註冊後可看大圖

我想加,同埋通常焊幾耐架??THANKS

MK MMS and CT both have this service, about half hour work, depends on they are busy or not...mostly wait for  1 hour is ok.
CT:九龍塘尾道 66-68 號褔強工業大廈 A 座 1408 室
電話: 27838084
(太子站 C2 出口, 雅蘭街李寶椿健康院斜對面, 步行約五、六分鐘)
(巴士、小巴在京港酒店附近落車, 步行約三至五分鐘)

MMS:旺角, 廣東道 1123 號, 福安工廠大廈 4樓b(豪華戲院旁)

[ 本帖最後由 scalpel 於 2008-1-20 22:06 編輯 ]

我加左fet未呀,我連自已加左同未加都唔知

原帖由 isaacleeaa 於 2008-1-20 22:06 發表

                               
登錄/註冊後可看大圖

我加左fet未呀,我連自已加左同未加都唔知

Actually it has Fets on the original PCB, but if you want to use faster motor, need to add and change to better FET. Otherwise the FETs will burn out!

甘通常d人+FET加幾粒架?

同埋去車場加幾錢$$

p.s請問你建議我用咩motor呢?thanks!!!!

原帖由 isaacleeaa 於 2008-1-20 22:13 發表

                               
登錄/註冊後可看大圖

甘通常d人+FET加幾粒架?

同埋去車場加幾錢$$

p.s請問你建議我用咩motor呢?thanks!!!!

Normally people add 4-6 FETs, from $250-$300......You are playing on the track? which place you go, MMS or CT?

i have gone to mms,but......there are no peolple,so i want go to ct and play

幾錢呀?
問下喳

原帖由 isaacleeaa 於 2008-1-20 22:22 發表

                               
登錄/註冊後可看大圖

i have gone to mms,but......there are no peolple,so i want go to ct and play

Weekend should have more people there, AD stock or stock R should be enough for you to play!