請教 RM or MM

想請教各位, 呢部係 MM 定係 RM?  (上面只係寫住 MR-02)

咁 MM or RM 可唔可以交換車殼? 其他 d Mini-z 殼又啱唔啱裝? Thank you!

[ 本帖最後由 rc1 於 2008-2-1 03:28 編輯 ]

原帖由 rc1 於 2008-1-31 12:46 發表

                               
登錄/註冊後可看大圖

想請教各位, 呢部係 MM 定係 MR?  (上面只係寫住 MR-02)

咁 MM or RM 可唔可以交換車殼? 其他 d Mini-z 殼又啱唔啱裝? Thank you!~

This is MM, MM, the motor is in fornt of the rear axle, while MR is, motor behind or on the rear axle. Original MM can use 98mm body only. MR is for 94mm only. But if you change to Atomic Version II, III motor mount, it's also MM setting, but you can use 94mm body then.

I guess not. Yes, the photograph shows an MM, but the other kind is RM, not MR.
MM= motor in front of the rear axle.
RM= motor behind the rear axle.
MR is just the front of the MR-02. It does not indicate the position of the motor.
There is also something called RLM or RML (can't remember exactly) indicating it has a longer wheelbase.

原帖由 billy86che 於 2008-1-31 13:07 發表

                               
登錄/註冊後可看大圖

I guess not. Yes, the photograph shows an MM, but the other kind is RM, not MR.
MM= motor in front of the rear axle.
RM= motor behind the rear axle.
MR is just the front of the MR-02. It does not i ...

Just typing mistake  I mean RM!

多謝各位師兄...

係 RM (我之前打錯 RM)

原帖由 scalpel 於 2008-1-31 13:01 發表

                               
登錄/註冊後可看大圖

This is MM, MM, the motor is in fornt of the rear axle, while MR is, motor behind or on the rear axle. Original MM can use 98mm body only. MR is for 94mm only. But if you change to Atomic Version II, III motor mount, it's also MM setting, but you can use 94mm body then

How much is Atomic Version II, III motor mount? Can anybody provide a photo of how does it look like?

And after I change the motor mount, I can use 94mm body. But at the same time, can I still use the 98mm body?

Thank you...

原帖由 rc1 於 2008-2-17 03:06 發表

                               
登錄/註冊後可看大圖

How much is Atomic Version II, III motor mount? Can anybody provide a photo of how does it look like?

And after I change the motor mount, I can use 94mm body. But at the same time, can I still  ...

Hard to find Ver II now, Ver. III is about $250. You can still use 98mm, even 102mm is ok too....just change the "cha cha plate" and shift the carbon T plate back at the bottom.