balancer & orion lipo 連接!

見圖blancer 插 用2CELL
紅接紅--電池(+), 黑接黑--電池(-), 中間的黑色接小小插

登錄/註冊後可看大圖

有咩討論呀???係你唔知搾

佢又大陸電....人地又大陸電.....人地方便好多囉

my  friend want to know how to connect with orion.

原帖由 馮馮ymc 於 2008-3-12 23:42 發表

                               
登錄/註冊後可看大圖

有咩討論呀???係你唔知搾

是我唔知搾......他是POST給我看的.....THX!!!

原帖由 gtimax 於 2008-3-12 23:46 發表

                               
登錄/註冊後可看大圖

my  friend want to know how to connect with orion.

原帖由 penny..t.o.p. 於 2008-3-12 23:48 發表

                               
登錄/註冊後可看大圖

是我唔知搾......他是POST給我看的.....THX!!!

下個月等我d大6电介吓你d洋葱电先

原帖由 馮馮ymc 於 2008-3-12 23:51 發表

                               
登錄/註冊後可看大圖

下個月等我d大6电介吓你d洋葱电先

唔好話介.......大家交流下.....給我一個學習機會

原帖由 penny..t.o.p. 於 2008-3-12 23:56 發表

                               
登錄/註冊後可看大圖

唔好話介.......大家交流下.....給我一個學習機會

呀馮......我的新义機

原帖由 penny..t.o.p. 於 2008-3-12 23:56 發表

                               
登錄/註冊後可看大圖

唔好話介.......大家交流下.....給我一個學習機會

可同一時間.....用一個义機.....兩個Blancer义兩排電

C Hng, how much that you buy that 1210i + LBA10 Balancer !?

原帖由 penny..t.o.p. 於 2008-3-13 12:02 AM 發表

                               
登錄/註冊後可看大圖

可同一時間.....用一個义機.....兩個Blancer义兩排電

so good? how much for everything? pls post pics with everything setup pls for reference

原帖由 apky2003 於 2008-3-13 00:28 發表

                               
登錄/註冊後可看大圖

C Hng, how much that you buy that 1210i + LBA10 Balancer !?

义機加兩個 Balancer.......$1800........我朋友幫我訂的......不是香港買的

原帖由 ttyy 於 2008-3-13 00:39 發表

                               
登錄/註冊後可看大圖

so good? how much for everything? pls post pics with everything setup pls for reference

我下星期才有時間TRY 呀.........

including the temp senor and adapter, the price is very good.
you know hk shop will sell those sensor and adapter for very high price.

I use this combo, tailor made for Orion Lipos. With battery plugs to equalize and balance orion cells. BTW.. this balancer claimed to be workable on all lipo chargers

[ 本帖最後由 kawada 於 2008-3-13 00:54 編輯 ]

ah 8.365v???
when using balancer....output should be not more than 4.2v cut off@1A (1c)
the charging rate for each cell is low 3~4.2v max @ 1A is recommended's charging rate(1C) for most lipo batteries
maybe I'm wrong because I'm using different 1-6 cells balancer(Equinox)
if I'm right, you are making a little bomb at home!

[ 本帖最後由 looseman 於 2008-3-13 10:11 編輯 ]

8.365v for 2 lipo cells, i.e. ~4.18V per lipo cell, still hasn't reached the upper limit yet and the charging current shown in the display is 0.51A which is pretty small. Please correct me if I'm wrong.

原帖由 Chrispo 於 2008-3-13 08:19 發表

                               
登錄/註冊後可看大圖

8.365v for 2 lipo cells, i.e. ~4.18V per lipo cell, still hasn't reached the upper limit yet and the charging current shown in the display is 0.51A which is pretty small. Please correct me if I'm wron ...

I'm using ICE charger with Equinox balancer
ICE output is 4.2v@1A, to balancer, I usually charge 3S 20c/25c at this setting, if I set 3x4.2v(12.6v) output which is overed V 3 times.
each cell get 4.15v~4.18v when balanced and fully charged, the combined V is about 12v + / - 5%, checked by digital mulitimeter that means I'm right.

these pictures showed above are ICE and Equinox cloned which I guess the setting should be same as mine. what I'm worry about output at 8v for 2S maybe wrong because the balancer is getting 8v to each cell, not 4.2v, I might getting wrong, their looking are almost same to mine, but they are different models that maybe the balancer can convert 8v to 4.2v for each cell.

PS: No matter it charges 1S or 6S, the charger's output is 4.2v max to balancer. if charge 6S at 4.2v x 6 =25v...that doesn't make sense for me.

[ 本帖最後由 looseman 於 2008-3-13 10:01 編輯 ]

原帖由 looseman 於 2008-3-13 07:20 發表

                               
登錄/註冊後可看大圖

ah 8.365v???
when using balancer....input should be 4.2v cut off@1A (1c)
the charging rate for each cell is low 3~4.2v max @ 1A is recommended's charging rate(1C) for most lipo batteries
maybe I'm  ...

It should be the output voltage of the Orion Lipo, but not charging current ( dont kidding me ) I believe charging voltage is not adjustable other than current, which 1C is the max.  Make it simple, here is the example

Battery Capacity = 4800A, where 1C = 4.8A as the Max charging current