RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: tatame
打印 上一主題 下一主題
收起左側

E-Savage, E-Zilla 技術交流區"新殼!Chevy Sliverado相"

[複製鏈接]
21#
mikewu 發表於 2008-6-2 11:24:46 | 只看該作者
原帖由 move7648 於 2008-5-31 13:29 發表
personly, i may say,
i wish to play a RWD,
i already have 3 touring (2 x 4wd, 1 x fwd), 1 m-car (4wd), and 1 big foot (also 4wd)
so i really waana try RWD car! (DT02 vs E-firestorm)


DT02 is a totally different thing compare with the E-firestorm....  E-firestorm is much stronger and easier to handle (with wider wheels), and the plastic parts for HPI are much better than Tamiya
22#
 樓主| tatame 發表於 2008-6-2 11:27:39 | 只看該作者
原帖由 mikewu 於 2008-6-2 11:23 發表
I use stock... no problem in TKO offroad sand... I think you have "flipping" problem when you play on hard ground.....  
you can install "wheely bar" for Savages to solve the problem.....  just like  ...



無錯, 我係硬地玩!! 原來有 wheely bar 賣, 等我仲想自己DIY ~~ 係咪呢隻??
佢for SAVAGE XL ~~ 一樣裝到去E-zilla ?? thanks
#85245  Wheelie Bar Set for Savage


                               
登錄/註冊後可看大圖


http://www.hpiracing.com/products/en/85245/

[ 本帖最後由 tatame 於 2008-6-2 11:31 編輯 ]
23#
mikewu 發表於 2008-6-2 11:29:47 | 只看該作者
原帖由 tatame 於 2008-6-2 11:27 發表



無錯, 我係硬地玩!! 原來有 wheely bar 賣, 等我仲想自己DIY ~~ 係HPI 自己有出???


I don't remember who made them.. check HPI, Chee Lok and GPM la...
24#
 樓主| tatame 發表於 2008-6-2 11:32:30 | 只看該作者
原帖由 mikewu 於 2008-6-2 11:29 發表


I don't remember who made them.. check HPI, Chee Lok and GPM la...



會唔會係上面

#85245  Wheelie Bar Set for Savage
25#
manju 發表於 2008-6-2 11:52:04 | 只看該作者
我都買左 E-Zilla,
起頭問題, 不如順住比油 甘,
有少少難度仲好玩   
行沙地應該 No problem
26#
simontam 發表於 2008-6-2 13:43:12 | 只看該作者

回復 19# 的帖子

最後一對藍,其它彔,如平路油壓內加3片3mm的o-ring(軟),30度油,set到最底位,換不綉鋼"羅C"8粒(鴨記)。
原裝麽打12cell限滑鬆1/2圈,14cell 3/4圈。
ESC加6V 35mm風扇,正負見圖。
27#
manju 發表於 2008-6-2 13:58:43 | 只看該作者
原帖由 simontam 於 2008-6-2 13:43 發表
最後一對藍,其它彔,如平路油壓內加3片3mm的o-ring(軟),30度油,set到最底位,換不綉鋼"羅C"8粒(鴨記)。
原裝麽打12cell限滑鬆1/2圈,14cell 3/4圈。
ESC加6V 35mm風扇,正負見圖。


請問師兄, 14 Cell
是否可行 8.4V x2?
28#
simontam 發表於 2008-6-2 14:07:20 | 只看該作者
yes
如直電8.4v,電池膠架前剪個孔,或換twinforrce電池膠架鑽3個孔便可。(紅星買)
29#
supercritical 發表於 2008-6-2 22:12:38 | 只看該作者
師兄!勁有興趣!
請問響邊度買呢?同埋幾錢呢?

[ 本帖最後由 supercritical 於 2008-6-2 22:14 編輯 ]
30#
move7648 發表於 2008-6-3 00:13:49 | 只看該作者
原帖由 mikewu 於 2008-6-2 11:24 AM 發表


DT02 is a totally different thing compare with the E-firestorm....  E-firestorm is much stronger and easier to handle (with wider wheels), and the plastic parts for HPI are much better than Tamiya


就係你個死佬個J兄放毒囉!!
plastic parts problems is the mainly consideration why i still not buy DT02, even MS edition

so, i think E-firestorm is my last choice
hope i can run mine with u in TKO with mini mike sir soonest!!
31#
 樓主| tatame 發表於 2008-6-3 17:18:06 | 只看該作者
買左la ~~ E-zilla果然好毒, 用料好正, 果然同雙星無得比, 架車d力好勁,不過鎖避震條縲絲咁短怕唔怕?? 最衰jethobby 無wheelie bar 賣..同佢訂佢就咁叫我留電話..香港仲有邊度有得賣吵. by the way ~ HPI好似無出專用wheelie bar俾E-savage, 但上網話可以用到savage XL o個隻, 唔知係咪真, 你地有無試過用1/8 SAVAGE d shell~~ 大就大d, 但多好多choice又靚好多


                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖
32#
mikewu 發表於 2008-6-3 17:20:48 | 只看該作者
原帖由 move7648 於 2008-6-3 00:13 發表


就係你個死佬個J兄放毒囉!!
plastic parts problems is the mainly consideration why i still not buy DT02, even MS edition

so, i think E-firestorm is my last choice
hope i can run mine with  ...


Hehehe.. I am sorry...     Make sure you buy a red one so that we ALL look alike!!!
33#
mikewu 發表於 2008-6-3 17:30:08 | 只看該作者
I use Parma School bus shell for mine and it fits ok!  And I know a brother here use Porsche Cayanne Body and it fits as well!!
34#
 樓主| tatame 發表於 2008-6-3 17:31:18 | 只看該作者
買左呢個shell ~~ 需然係for 1/8 但夾硬放落去都ok ~~ 好鬼鍾意d american muscle~~


                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖
35#
 樓主| tatame 發表於 2008-6-3 17:33:14 | 只看該作者
原帖由 mikewu 於 2008-6-3 17:30 發表
I use Parma School bus shell for mine and it fits ok!  And I know a brother here use Porsche Cayanne Body and it fits as well!!

校巴正wor ~~~~~~~~~~~~~原本係咪都係for 1/8 車????好fit位wor ~ ~師兄你o係邊度玩?個場好正, 要$ ma !? 我都想join !!

thanks
36#
mikewu 發表於 2008-6-3 17:35:58 | 只看該作者
The track is no longer in business lu.......    It used to call FSY in Tin Shui Wai

Anyway, I love American musle cars too.........  I am putting a Chevy El Comino shell on as next shell...  it's a work in progress now....
37#
 樓主| tatame 發表於 2008-6-3 17:41:18 | 只看該作者
原帖由 mikewu 於 2008-6-3 17:35 發表
The track is no longer in business lu.......    It used to call FSY in Tin Shui Wai

Anyway, I love American musle cars too.........  I am putting a Chevy El Comino shell on as next shell...  it' ...


好可惜 香港已經無乜場可以俾呢架大怪物玩~~ 我之前都買左個chevy shell ~ 不過係SS ~~ 你個新shell 整好記住post上黎分享下 HPI 其中一樣吸引我就係多muscle car shell ~~ 日本仔唔識貨又愛國好小出呢d正野
38#
mikewu 發表於 2008-6-3 17:43:02 | 只看該作者
原帖由 tatame 於 2008-6-3 17:41 發表


好可惜 香港已經無乜場可以俾呢架大怪物玩~~ 我之前都買左個chevy shell ~ 不過係SS ~~ 你個新shell 整好記住post上黎分享下 HPI 其中一樣吸引我就係多muscle car shell ~~ 日本仔唔識貨又愛國好小出呢d ...


Sure sure... still waiting for you to show up in TKO lei!!!  
39#
 樓主| tatame 發表於 2008-6-3 17:44:35 | 只看該作者
原帖由 mikewu 於 2008-6-3 17:43 發表


Sure sure... still waiting for you to show up in TKO lei!!!  



快la ~~ plan 緊呢個星期日join 你地, 希望有機會同你地走返轉
40#
leoleo 發表於 2008-6-5 10:25:47 | 只看該作者
E-SAVAGE和ZILLA的區別主要是材料

ZILLA是HPI早期推出的,當時發現材料不行,后來更換了材料供應商,改善了產品質量,推出的新版就叫做E-SAVAGE
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-10-6 10:42 , Processed in 0.099610 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表