7.5R Brushless Gear Ratio

Do U know the suitable Gear Ratio for 7.5R Brushless Motor?

Thanks All !!

[ 本帖最後由 Ken 於 2008-6-25 22:13 編輯 ]

Try is the best!!!
Ask is for fun

Actually, I don't have any idea.

Do u have any suggestion?

原帖由 yokomo 於 2008-6-25 21:23 發表

                               
登錄/註冊後可看大圖

Do U know the suitable Gear Ratio for 7.5R Brushless Motor?
Thanks All !!

５、５無問題

原帖由 yokomo 於 2008-6-25 23:42 發表

                               
登錄/註冊後可看大圖

Actually, I don't have any idea.

Do u have any suggestion?

由7.5/1開始,快盡就減,遲盡咪加,.....5.5玩11.5R差唔多

look through the LRP web site, they have a reference gearing chart in some of there ESC or motor specs. But each brand of motors has different gearing so you will still need to try.

If your motor temperature after one run is below 70 degrees C should be safe (or 71 to 79 degrees on Novak site) if temp above these you have over gear.

http://www.lrp.cc/fileadmin/lrp_ ... x11-e-061123-fv.pdf
http://www.teamnovak.com/downloa ... b_lipoprogsheet.pdf

Actually, I got one pcs Orion 7.5R but cannot find the proper gear ratio from Orion...

Anyway, thanks all & I will try....

原帖由 yokomo 於 2008-6-26 12:09 PM 發表

                               
登錄/註冊後可看大圖

Actually, I got one pcs Orion 7.5R but cannot find the proper gear ratio from Orion...

Anyway, thanks all & I will try....

my fd using orion 7.5r for ta-05r, around 6.95

ccc_78,
Thanks a lot.... hope to try with U guys.

原帖由 yokomo 於 2008-6-27 01:59 PM 發表

                               
登錄/註冊後可看大圖

ccc_78,
Thanks a lot.... hope to try with U guys.

好呀, 你幾時會去呀
成日落雨, 好手癢......