粗幼鏈嘅分別

啱啱喺 Tamiyaclub 度見到呢幅相.....即刻頭都痕.....

有冇兄弟知道嗰條幼鏈係セ Q 車用o架 ??......

我淨係知 optima 係用粗鏈咋.......   

http://www.tamiyaclub.com/showro ... =77376&id=21211

[ 本帖最後由 minimini 於 2008-7-13 00:31 編輯 ]

I thought all the 1/10 and 1/12 rc cars use the same size chain.....

I know there are some slightly bigger one in some machines (e.g. x-ray processors).

A B C 1/12 4WD 平路啊!廿多年前

[ 本帖最後由 chiuchiu 於 2008-7-13 11:03 編輯 ]

ayk 1:12  4 wd on road

I have a YZ834B and also Kawada Wolf, they use the same size chains.

Might be 834B use thin gain and tubro optima use think gain, I think!

Minimini:

Is it true? 834B use thin chain and optima is thicker than 834b?

原帖由 tiger1 於 2008-7-14 20:14 發表

                               
登錄/註冊後可看大圖

Minimini:

Is it true? 834B use thin chain and optima is thicker than 834b?

yes.......my 834b is using thin chain........

but .......I tried the thin chain in optima's pulley ........still fits.....

SO, the thin chain was the 'standard' for 1/12, or 1/10 cars back then. The thick one must be for industrial purposes.