給TB Evo 5 MS 用的摩打齒

請問以下的摩打齒合 TB Evolution 5 MS 用嗎?

RC 0.4 Pinion Gear (40T, 41T)

謝謝指教!   

原帖由 prodanny 於 2008-7-23 00:17 發表

                               
登錄/註冊後可看大圖

請問以下的摩打齒合 TB Evolution 5 MS 用嗎?

RC 0.4 Pinion Gear (40T, 41T)

謝謝指教!   

RC 0.4 Pinion Gears (ie. 64pitch) are compatible with TB Evo 5 MS, so the above gears can be used. However, I can't remember the size (ie. no. of teeth) on the Spur Gear that came with the kit. 40/41T look like too large. (unless you are using the slower motors for drifting). There should be a recommended gear ratio table in the manual and you can check what size of Pinion gear should be used for what motor type.

[ 本帖最後由 tux 於 2008-7-23 13:53 編輯 ]

多謝你的指教, 我諗住用好盈既無刷白豬落 TB Evo 5 MS 度, 所以用較細既gear ratio, 根據說明書, 41T對應5.71既gear ratio. 但說明書冇提供零件編號, 上網就搵到以上零件, 所以想問下大家.

唔該晒!