洗啤鈴問題

小弟有以下一啲問題,煩請各位師兄多多指教

1.幾時先要洗啤鈴?
2.如果要洗啤鈴要點洗先岩?
3.用咩洗最好?
4.洗完加邊隻啤鈴油最好?同埋正碓係要加係邊樹?

污糟,唔多順時咪要洗囉.......

以前O的人鍾意用白電油嚟洗.......

宜家O既人會用......

GZOX洗完,再用WD40洗........夠晒乾淨......
之後再落啤鈴油......夠用!

但我可以肯定咁講,洗完O既啤鈴係一定會唔襟,無論邊一種方法洗.
因為O的啤鈴一洗走晒佢入面O的雪油,就一定唔襟.......

洗啤鈴O既原因唔係要佢襟,係要佢順同快.......

加啤鈴油,用TRINITY,MUCH MORE或TEAM ORION都幾好,係個邊位加一圈就OK,唔駛太多.

最好一部 超聲波洗缸。

多謝各位既幫忙

超聲波洗缸? 我諗我地買唔起呢啲野

更係唔襟啦! 用WD40洗! 仲有用白電油 D 啤鈴膏會凝固!

what other people uses is benzine. it remove any oil and dirt that stucks and sticks onto the bearing.
soak it in benzine for 10 min to remove any oil from the bearing.

after that, use bearing lubricant for the bearing. (WB40 will NOT work as it is simply a de-greaser!)

Ultrasonic cleaner works well on jewellery, not so sure about bearing thou.....

所以我係話用GZOX洗完再用WD40洗,唔係話直接用WD40洗.....

ANYWAY,洗完O既啤鈴只係會順,但唔會襟.