The very original 415 uses TA04 arms. Starting from 415MSX, it started using the reversible suspension arms. These arms are also found on the TA05 IFS (though not graphite materials) but in TA05 IFS-R, it switched to the short reversible suspension arms like 416
Set Contents
# RCC TRF416 C Bag x 1
# TB Evo5 D Bag (Dx2) x 2
# RCC TRF416 E Bag (E) x 1
# RCC TRF416 F4 Bag (F4) x 1
# OP.587 5mm Shim Set Shim Bag (0.1mm) x 1
# OP.585 3mm Shim Set Shim Bag (0.1mm) x 1
# 1050ZZ Bearing (CN) Domestic Stock x 8
# 4mm Adjuster 2(Black) (4) x 1
# 5mm Adjuster 2(Black) (4) x 3
# 3x10mm Screw[Black Trivalent Chromate] x 3
# 4.1x11.5x1.0mm Spacer (Alu.) Not anodized x 4
# 5.5x0.5mm Setting Spacer (Alu.) x 8
# 5.5x2.0mm Setting Spacer (Blue) x 4
# 5x6.4x1.5mm Spacer (Blue) x 4
# 3x10mm Screw [Black Nickel] x 3
# 4.1x11.5x0.5mm Spacer (Alu.) Not anodized x 4
# 5.5x1.0mm Setting Spacer (Blue) x 4
# 5.5x3.0mm Setting Spacer (Alu.) Not anodized x 8
# RCC TRF414X 3x0.7mm Spacer
# 5x9mm Ball Connector(Lube Plated) x 2
# RCC TB Evo IV Flange Tube S(Black Nickel) x 2�
# 5mm Ball Connector (Black)m=0� x 10
# 3x10mm Screw Set (Black ACP) x 8
# 3x8mm Screw Set(Black ACP) x 2
# 3x3mm Grub Screw(W-Point)
# [Trivalent Chromate] x 5
# 4.5x3.5mm Flange Tube x 2
# RCC TRF416 Wheel Axle x 4
# 2.6x22mm Stainless Shaft x 2
# 2.6x25mm Stainless Shaft x 2
# RCC TRF414M Cross Joint x 4
# 2x9.8mm Needle Roller Pin x 4
# 3x2.5mm Grub Screw (Black) x 5
# TRF414M WCR (RC Limited Ed.) Clamp type
# Alu. Wheel Hub x 4
# 1.6mmx4mm Cap Screw (Ni) x 5
# 2x10mm Stainless Shaft x 4
# 1.5mm Hexagon Wrench (14x45)JIS Standard x 1
# Box (New) x 1
# Instruction Manual (New) x 1
收藏
勁正
嬲嬲
樓主
