我的雜物房

Don't 諗 la. Sell them to me. I give you 100 bugs

原帖由 minimini 於 2008-10-31 11:23 發表

                               
登錄/註冊後可看大圖

所似直到而家.......任何一代嘅 RC10 都仲好受人歡迎..........

喺外國嘅一 d 懷舊車比賽........"阿爺版 RC10" 幾乎贏哂咁滯.......就算攞嚟同 d 現代 2WD buggy 比較.... ...

"阿爺版 RC10" 幾乎贏哂咁滯... I believe. The running performance of my 阿爺版 RC10 is very good. It is very stable and easy to be controlled. You can't imagine that the performance of a 20 yrs old car can up to such standard.

原帖由 ryancmlam 於 2008-11-11 22:30 發表

                               
登錄/註冊後可看大圖

Don't 諗 la. Sell them to me. I give you 100 bugs

你想要..........but 我都唔知開個咩價俾你..........  

套呤我都係喺鴻聲買之嘛.........不過應該係 199x 年..........鴻聲仲喺深水埗嗰陣 (唔記得係福華街定係福榮街 lu.........

原帖由 minimini 於 2008-11-11 23:01 發表

                               
登錄/註冊後可看大圖

你想要..........but 我都唔知開個咩價俾你..........  

套呤我都係喺鴻聲買之嘛.........不過應該係 199x 年..........鴻聲仲喺深水埗嗰陣 (唔記得係福華街定係福榮街 lu...... ...

91,2年到啦！係福榮街！

原帖由 師傅東 於 2008-11-11 23:06 發表

                               
登錄/註冊後可看大圖

91,2年到啦！係福榮街！

嗰陣嘅深水埗.........九龍城........同埋北角.......簡直係 R/C fans 嘅朝聖地........

HPI鈴就冇留低嘞！只有呢set全新未開嘅sticker！

原帖由 minimini 於 2008-11-11 23:10 發表

                               
登錄/註冊後可看大圖

嗰陣嘅深水埗.........九龍城........同埋北角.......簡直係 R/C fans 嘅朝聖地........

我玩車嗰時已經有好景！但都會周圍去其他區嘅RC店！灣仔、北角係最常去嘅！！

原帖由 minimini 於 2008-11-11 23:01 發表

                               
登錄/註冊後可看大圖

你想要..........but 我都唔知開個咩價俾你..........  

套呤我都係喺鴻聲買之嘛.........不過應該係 199x 年..........鴻聲仲喺深水埗嗰陣 (唔記得係福華街定係福榮街 lu...... ...

Just kidding. Similar kind of HPI rim is still available in the market

原帖由 ryancmlam 於 2008-11-11 23:22 發表

                               
登錄/註冊後可看大圖

Just kidding. Similar kind of HPI rim is still available in the market

近代少少嘅 HPI Star wheels 我都有買.......不過全部濶呤........要自己 cut 窄佢做前呤.......

原帖由 師傅東 於 2008-11-11 23:14 發表

                               
登錄/註冊後可看大圖

HPI鈴就冇留低嘞！只有呢set全新未開嘅sticker！

wow......正 !!.......

我都有一 pack 白色........張咭頭紙好鬼正.......

原帖由 minimini 於 2008-10-22 12:16 發表

                               
登錄/註冊後可看大圖

最近喺一個外國網站.........幸運地買到呢套 RC10 炭兜.......

(又嚟斜紋...... )

Bro mini, I find a similar 炭兜 in ebay. So expensive ....

http://cgi.ebay.com/ws/eBayISAPI ... p;item=280284145400

May I know how much you get it ?

Wow, it finally ends at USD365

USD$365 is not bad, back in the 90s, this chassis alone will be about USD$200 to 400, depending on the brand

原帖由 tiger1 於 2008-11-18 16:13 發表

                               
登錄/註冊後可看大圖

USD$365 is not bad, back in the 90s, this chassis alone will be about USD$200 to 400, depending on the brand

agree !!......the end-bid price is lower than what I expected......

What ? this stuff worth USD400 ?

原帖由 ryancmlam 於 2008-11-19 01:06 發表

                               
登錄/註冊後可看大圖

What ? this stuff worth USD400 ?

bro Ryan........seems that you feel a bit shocking about the end-bid price.......but this is the truth........

that's the reason why I say........gold tub is difficult to get..........woven graphite tub is far far difficult to get.......

原帖由 ryancmlam 於 2008-11-19 01:06 發表

                               
登錄/註冊後可看大圖

What ? this stuff worth USD400 ?

Ha, ha, I think this carbon tub worth close to USD$500 in a good economy. I am quite sure this USD$350+ price is achieved only because we are in a recession

Gold tub, there are many, carbon tubs are far and between.

Anyway, price is what is paid and value is what is received.

I just get an RC10 graphite (not the tub, only the single-layer board)

[ 本帖最後由 ryancmlam 於 2008-11-19 19:13 編輯 ]

Hi Bro Ryan,
How much you get this board?
I really like and hope to get one for my RC10.
Thanks!